Hot Tub Error Code List
HL High limit switch tripped. COOL = Spa water is more than 20° F cooler than the temperature set point.FLO* = Flow Switch (heater is deactivated. You should verify priming on all pumps the first time you fill the spa with water, as well as each time you refill the spa with water (after having previously drained Back to Top rCO or CLEAN COVER Message Time to Clean "Cover Reminder" (rCO).Appears Every 180 Days*. his comment is here
To bleed an air lock loosen one of the heater fittings a quarter of a turn while a pump is running. Remove the Spa Cover and allow Sanitizer to Dissipate, or do a Partial Water Change.Note: If you do Not have an ORP Sensor installed in the Spa System, you should Never Closed Slice Valve.7. Heater Start Up will begin again after about 1 Min.
Hot Tub Error Codes
In most cases, for newer spas anyway, the water flow problem can be quickly remedied and the spa will cool, reset and start again on it's own. Note: Internal freeze protection only functions when there is proper power running to the spa, and the control system is operational. All Reminder Messages can be Disabled through the Topside Panel Users Menu.* Note: The Balboa Default Interval is 365 Days, but some Spa Brands or Models may be Different.
ICE = Freeze protection. One sensor has detected 110°F. Back to Top SF or SAFETY FAULT Message There is a "Safety Fault" (SF) condition on a spa with a pump suction blockage switch.On a spa with a pump suction blockage How To Fix Flo Error Hot Tub COL Cool condition.
Pr = When spa is first actuated, it will go into Priming Mode. Balboa Hot Tub Error Codes Shut the power down to the hot tub and contact the dealer or service technician if the problem continues.Water is below set tempCondition that provides freeze protection and activates if temps Both are secured with black plastic nut around the gray cable. One sensor has detected 118° F at heater.
Heat Related Pump Not Running.8. Hot Tub Error Code Oh th2/current temperature = On startup indicates temperature probe problem. The condition causes the circulation pump to turn off automatically if it’s running in order to avoid adding additional heat to spa water that could cause “Overheat” conditions. Indicates a shorted sensor and the heater is disabled.Contact dealer or a service technician.BLB (Flashes in between water temperature and “blb”)Indicates that spa needs a new UV bulb.Replace UV bulb (you
Balboa Hot Tub Error Codes
Sn2 = Nonfunctional temperature sensor. Heat Related Pump Not Primed. Hot Tub Error Codes If buzzing sound or lack of sound is detected, cut off the water to the hot tub – may indicate that pump is notproperly primed. Vita Spa Error Codes ILOC = Interlock failure - possible pump or ozone spike . (---) =Unknown water temperature. (Displays when first powered up after refill).
HLEr Hi Limit Over Heat. http://ivideoconverter.net/error-code/hbo-error-code-203.html Shut the power down to the hot tub and contact the dealer or service technician if the problem continues.– – –The water temp has raised above acceptable safety limits and triggered DO NOT remove the protective covers from any electrical enclosure, or attempt to service any related electrical device, unless you are a qualified electrician or service professional. If tripping continues, call for service.• Deactivate spa lock Hercules Control Systems for Spas or Hot Tubs: OH = Spa temp exceeds acceptable limits FLO = Flow problem ICE = Freeze Marquis Spa Error Codes
The Spa or Hot Tub Panel Displays: :IC , iCE This indicates that the auxiliary sensor detects a possible freeze condition. Pressure switch is not working. The spa is at a temperature above 108° . weblink If there is Now a Message Other than a "PSt" or "PERSIST FAIL" Persistent Memory Error Message, that Message will Now have to be Diagnosed.
If there is No Error Message, Select "No Error Message" Below. Great Lakes Hot Tub Error Codes Rare system error. You can check the switch by performing the test below.
All Reminder Messages can be Disabled through the Topside Panel Users Menu.* Note: The Balboa Default Interval is 7 Days, but some Spa Brands or Models may be Different.
Refill, if necessary. If the Spa with the "SF" Safety Fault Error Message has a pump suction blockage switch, Select "Spas with Pump Suction Blockage Switch" Below. FL1 Water flow problem, inhibited or pressure switch malfunction. Coleman Spa Error Codes All Rights Reserved.
Heater is shut down, but other spa functions run normally. OH, OHH, OHS, OHt, HL, HiLi, Sn2, Sn3, tS, Ht, Blinking Lights Temperature Sensor Failure. Some panels need a prompt from you to restart. http://ivideoconverter.net/error-code/hot-tub-error-code-hl.html If a continuously running low-speed-only pump is only used for filtering (not for heating), that is not called a circ pump, but instead may be referred to as a "continuous filtration
If there is No Error Message, Select "No Error Message" Below. All Reminder Messages can be Disabled through the Topside Panel Users Menu.Note: The Balboa Default is to have this Message Disabled. Flow switches are plumbed in line with the plumbing.